Shandong Fengtu IOT Technology Co., Ltd
Sales Manager:Ms. Emily Wang
Cel,Whatsapp,Wechat:+86 15898932201
Email:info@fengtutec.com
Add:No. 155 Optoelectronic Industry Accelerator, Gaoxin District, Weifang, Shandong, China
Sales Manager:Ms. Emily Wang
Cel,Whatsapp,Wechat:+86 15898932201
Email:info@fengtutec.com
Add:No. 155 Optoelectronic Industry Accelerator, Gaoxin District, Weifang, Shandong, China
Model:FT-YGT1
Brand:fengtu
1.Flue dust transmittance detector measurement principle
The detection light crosses the flue, and the single optical path measurement system consists of two parts: the transmitter and the receiver. A high-brightness LED light source is installed in the transmitter, which emits a light beam through the diffuser and then through the flue, projecting it onto the focusing lens in the receiver and focusing it on the measuring detector; the other part is directly focused on the reference detector. By calculating the ratio of the signal intensity obtained on the two detectors, the light transmittance or light opacity value can be obtained, from which the light transmittance (or light opacity) and dust concentration value can be obtained.
2. Main features of Flue dust transmittance detector
Direct continuous measurement
Small size, light weight, compact structure
Directly display light transmittance or opacity
With lens contamination monitoring and compensation device
Automatic calibration and manual calibration, convenient and flexible
Measuring path 0.5-5 meters
With air purge passage
Long life LED signal light source
No moving parts - low maintenance
Easy installation and debugging
3. Flue dust transmittance detector technical parameters
How it works | Crossing the flue, single light path transmission |
light source | High brightness LED |
Response time | 3 seconds to reach 98% of the final value |
Measuring range | Light transmittance 0-99.99% |
Resolution | 0.01% |
Detectable gas | Smoke, fumes or related dusty gases |
Optical path length | 0.3-2m standard (other lengths can be customized) |
Average time | 1-59 seconds |
Calibration and calibration | Manual calibration and calibration (with calibrator) |
show | LCD display |
Analog Output | 4-20mA current loop |
Digital Output | RS485/232 |
Relay output | Two-way switch output (alarm value setting) |
Operating temperature | -20-50°C |
Operating humidity | 0-99% (non-condensing) |
Supply voltage | 220VAC; optional 12, 24VDC |
Power consumption | Maximum transceiver system 18W |
vibration | 2Hz-60Hz, maximum amplitude 2mm |
Housing Material | Die-cast aluminum |
Protection level | IP67 |
Microclimate refers to the special climate formed in the atmosphere of a local area, which is different from the macroclimate, due to differences in underlying surface factors such as surface properties, terrain, and vegetation. Compared with the macroclimate, the microclimate is closer to human pro...
The environmental grid monitoring station manufacturer [Fengtu Technology], located in Weifang, Shandong Province, has been engaged in the research and development and sales of meteorological environmental monitoring equipment since its establishment in 2017, and has achieved fruitful results in the course of many years of development....
The safe flood - season operation of reservoirs has always played a crucial role in China's flood prevention and control work, and it is also extremely challenging. Small and medium - sized reservoirs have become the weak links in the entire flood - prevention system. At present, most of these s...
The fall armyworm, also known as the autumn armyworm, is an agricultural pest native to the tropical and subtropical regions of the Americas. The adult has a wingspan of 32 - 40 mm. The forewings are gray to dark brown, and the hindwings are white with a narrow brown band along the edge. The larvae...